FORMWORKSDESIGNS Join the waitlist

A light for the glass you're proud of.

The Glass Accessory Mat is a soft disc of colour set into a magnetic fabric cover. Put a piece on it, switch it on, and let the glass do the rest.

Cover: Charcoal Minimal

In prototype. 8.5 in across, 12 mm thin, powered over USB-C.

Thin enough to disappear under the glass.

The target is 12 mm edge to edge, less than the width of an AA battery. The cover lifts off on magnets, so changing the look of the mat takes a second.

A flush light disc

The 3 in disc sits level with the cover, so a glass base rests flat on it with nothing to wobble on.

A magnetic cover

Lift it off to swap designs or wipe it clean. Nothing to unscrew.

USB-C and two buttons

Power comes in on the edge, with two buttons beside the port. What each button does is still being finalised.

light disc, 3 in 8.5 in, 216 mm The right edge, enlarged 8 times 12 mm light disc magnetic cover on top buttons and USB-C
Drawn to scale from the target dimensions. Final thickness will be confirmed on the prototype.
The fabric cover lifted off the base, showing the magnet strips under the cover and the light disc on the base
The cover lifts away from the base. Magnet strips under the fabric hold it in place.
The edge of the mat with the flush light disc, two buttons and a USB-C cable plugged in
The edge: two buttons and the USB-C port.

Three covers to start.

Each cover is its own magnetic layer, so the mat can follow the room. Pick one and the mat at the top of the page changes with it.

The real proportions.

Large enough to hold a substantial piece, small enough to live on a shelf or a desk. Every drawing here uses the true ratio between the parts.

8.5 in
across the whole mat
3 in
flush light disc
12 mm
target thickness, about half an inch
8.5 in 3 in
Top view. The disc is about a third of the mat's width.
Drink can2.6 in Coaster4 in Glass Accessory Mat8.5 in Dinner plate10.5 in
Everyday objects at the same scale. Sizes for the can, coaster and plate are typical, and vary by brand.

Where it's at, and how to hear first.

The design is done and the look is locked in renders. A working prototype is the next step. Join the waitlist and we'll write when price, ship date and preorders are ready, with nothing in between.

Design and renders. Done.
Working prototype. Next.
Price and ship date. Announced to the waitlist first.
Preorders. To follow.

Questions people ask.

How much will it cost?

The price isn't set yet. It will be set once the prototype is built and the real cost of making it is known. Everyone on the waitlist hears first.

When can I get one?

There's no date yet, and we won't guess one. The mat is moving from design into a prototype, and the waitlist gets the date as soon as it exists.

How is it powered?

Over USB-C, using the port on the edge of the mat. What's in the box, including whether a power adapter comes with it, will be confirmed before preorders open.

Can I change the cover?

Yes. The cover is held on by magnets and lifts straight off. Three covers are planned for launch: Charcoal Minimal, Violet Cosmic and Dark Green Botanical.

Are the sizes final?

They're the targets we are building to: 8.5 in across, a 3 in light disc and 12 mm thick. The prototype will confirm them, and we'll update this page if anything changes.